How to: Broadcast on Mixlr using Traktor and a MIDI controller (Windows)

This post explains how to broadcast on Mixlr using DJ software – Traktor and an external controller – Hercules DJ Console Mk4. You’ll be using Traktor to mix tracks from your PC, and your external MIDI controller to control your levels, crossfader etc. Your entire set will be broadcast live and direct on Mixlr. Sweet!

Tip – These instructions can be translated to almost any external controller or audio interface.

 

Step 1 – Open Traktor Preferences

You will find the audio preferences in Traktor’s settings:

Step 2 – Traktor Audio Setup

Ensure the Audio Setup settings in Traktor are as follows:

Step 3: Traktor Output Routing

In the Output Routing settings in Traktor, ensure the Output Monitor and Output Master are as follows:

Step 4: Map Controller to Traktor

You need to ensure your external controller is mapped to Traktor. Go into Controller Manager and map the controller to Device, In-Port and Out-Port to your external controller. You can find further information on mapping here.

Step 5: Mixlr Audio Source

Select Hercules as your audio source

Step 6: Connect output to input on Hercules

Traktor is sending audio to Output 1-2, whilst Mixlr is trying to receive audio from Input 1-2. Simply physically route Output 1-2 to Input 1-2 on the Hercules using a phono to phono cable:

Step 7: Go-live and enjoy!